Home  >  Digital Panel Meters  >  DPM Resistance

DPM A6XX7 Resistance meter Digital & Analog output

Item #: A6
Our Price: $350.00
Power Supply  
Display  
Input  
Comparator Output  
Output  
Quantity:
 

Description  more details

  • Modular Panel Meter Systems - Resistance
  • External Control
  • Set Point Comparator with Relay or Photocouple output
  • Output modules -setpoint- analog - RS232 & RS485
  • Universal power supply 90-264VAC or 6-60VDC Dual display option for setpoint comparator

All the code 7 options listed below are user selectable on this unit.
The multi display (set point display) is only needed if the comparator output option is selected

Resistance
Code 7 Range Display
adjustable		 Circuit Current Accuracy (23ºC ±>5ºC, 35~85% RH)
11 99.99 Ohms offset ± 9999
Full scale
0 to ± 9999		 ~ 5 mA ±(0.1% of rdg + 4digit)
12 999.9 Ohms ~ 0.5 mA
13 9.999 KOhms ~ 50 uA
14 99.99KOhms ~ 5 uA
Output Modules
Analog Output (isolated from input (LO))
Any display range to output analog signal can be set
Output Method PWM
Scaling Digital Scaling
Output Resistive load Accuracy
23 degs C +/- 5 degs		 Ripple
0 to 1 V > 10 KOhms +/- 0.5% full scale 50 mV p-p
0 to 10 V > 10 KOhms
1 to 5 V > 10 KOhms
4 - 20 mA less than 550 Ohms 25 mV p-p

 

External Control

Start/Hold : Shorted between COM terminal and start/hold terminal or same level --> hold Open COM terminal and start/hold terminal or 5 V --> start
D. ZERO : Shorted between COM terminal and D.ZERO terminal --> ON
P.HOLD : Shorted between COM terminal and P. HOLD terminal --> ON
R.RE (relay reset) : Shorted between COM terminal and R.RE terminal --> ON
P.SEL1 to 3 : as below
  pattern 1 pattern 2 pattern 3 pattern 4 pattern 5 pattern 6 pattern 7 pattern 8
P.SEL1
 OFF ON OFF ON OFF ON OFF ON
P.SEL2 OFF OFF ON ON OFF OFF ON ON
P.SEL3 OFF OFF OFF OFF ON ON ON ON
ON : Shorted between COM terminal and P.SEL terminal or same level
OFF : Open between COM terminal and P.SEL terminal or 5 V
Comparator Hi - Lo Set Point with relay output module
Control Method Computation by microcomputer
Measuring range
comparison		 high/Low limit setting including polarity, -9999 to + 9999
Setting condition By sampling period
No setting condition for set value
Comparison Conditions  
Indication > High setpoint HI
High set point >/= indication>/= Lo Set point GO
Indication< Lo set point LO
Comparison Relay
contact capacity		 AC125 V 0.3 A resistive load
DC30 V 1A resisitive load
Photo-coupler output DC30 V 50 mA
Hysteresis Settable from 1 to 9999 digits for each comparison set value

      

RS232 output module for A6000 DPM
Communication method Full duplex
Synchronous method Start and Stop
Transmission speed /4800/9600/19200/38400 bps
Start Bit 1 Bit
Data length 7 Bit /8 Bit
Error detection Even /odd parity
Stop Bit 1 / 2 Bits
Character Code ASC II
Transmission control none

 

RS485 output module for A6000 DPM
Communication method Full Duplex
Synchronous method Start and Stop
Transmission speed /4800/9600/19200/38400 bps
Start Bit 1 Bit
Data length 7/8 Bit
Parity Even/odd parity
Error detection BCC (Block Check Character) Check sum
Stop Bit 1/2Bits
Character Code ASC II
Transmission control none
Signal Name Signal Direction
Non-reversible output + Input/output
Reversible output - Input/output
Number of connectable meters Up to 31 units
cable length up to 500 m in total

 

 

Specifications
Main Display Red LED 20 mm high
Sub Display Green LED 6 mm high
Conversion Rate 1000/sec
Maximum Display 9999
Over-range indication displays "OVER" or "-OVER"
Zero Display Leading "zero" suppression
Decimal point Set to any position
Operating Temperature 0~ 50° C, 35 - 85% RH
Storage Temperature -10 ~+70° C, < 60% RH
Power Supply AC 100 - 240 Volts (AC Main Unit) +/-10%
DC 12 - 48 V ) DC main unit ) +/-10%
Power Consumption ~ 8VA (max load)
Dimensions mm 96 x 48 x 97.5
Weight 450 g
Dielectric strength (AC)Power supply/ input terminal/ output terminal - AC 1500V 1minute
(DC)Input terminal /output terminal - DC 500 V 1 minute
(Common) case/each terminal AC1500 V/min
Insulation resistance DC 500V more than 100 MOhm at above terminals

Reviews

Be the first to submit a review on this product!
Review and Rate this Item

Share







Pin It

Email A Friend

Send your friend a link to this product.