Home  >  Digital Panel Meters  >  DPM DC Voltage

DPM A9000 DC Voltage Current Process BCD out

Item #: A9
Our Price: $390.00
Power Supply  
Input  
BCD Output  
Quantity:
 

Description  more details

The A9000 is a 4.5 digit panel meter system with a selection of input and output cards to suit your application. Choose from input modules for, DC, Voltage DC current. or Process Signal ( 4-20mA, 0-5V, 0-10V ). BCD Output option.

  • 4.5 digits, 14.2 mm LEDs
  • BCD Output
  • External Control
  • DC, Voltage or current modules
  • Universal power supply 100-240VAC
  • or 5-12V, 12-24 V DC
  • Max Display 19999,
  • 96 x 48 x 75mm DIN
  • PDF A9000.pdf

DC VOLTAGE

Code 1 Range Display
adjustable		 Input Impedance Accuracy 23ºC ±>5ºC, 35~85% RH) Max allowable input
11 ± 199.99 mV offset ± 19999
Full scale
0 to ± 19999		 100m ohm ±(0.1% of rdg+ 2 digit) ±50V
12 ±1.9999 V
13 ±19.99 V approx. 1M ohm
14 ±199.99 V ±250V
15
Code E		 ±700.0V 100M ohm ±(0.1% of rdg+ 3 digit) ±700V

DC CURRENT

Code 2 Range Display
adjustable		 Input Impedance Accuracy Max allowable input
22 ±1.9999 mA offset ± 19999
Full scale
0 to ± 19999		 10 ohm ±(0.2% of rdg + 2 digit) ±50mA(22&23)
23 ±19.999 mA
24 ±199.99 mA 0.1 ohm ;±3A (24&25)
25 ±1999.9 mA

PROCESS CONTROL

Code B Range Display
adjustable		 Accuracy Input Impedance Max allowable input
2A 4-20 mA offset ± 19999
Full scale
0 to ± 19999		 ±(0.2% of rdg + 3digit) 10 ohm ±50mA
1V ±1-5V ±(0.1% of rdg + 3digit) 1M ohm ±50V
3V 0-±10V ±(0.1% of rdg + 3digit) 1M ohm ±50V
The A9000 is a modular panel meter system with a selection of input and output cards to suit your application. Choose from input modules for, DC, Voltage and current.. Select from 2 different output options:none, BCD TTL or BCD open collector. (see order details at the bottom of this page)
A9000 Common Specifications
Specifications
Input Circuit Single Ended Type
Sampling Speed Max 25 times per second
Over range warning For an input signal exceeding the display range, displays O.L.or O.L..
Display red 7 segment LED
Display range -19999 to 19999
Max display 19999
Zero display leading zero suppress
Built in EEPROM  
Number of rewriting 1,000,000 times/min
Operating temp and humidity range 0-50ºC 35-85%RH
Dimensions mm 96 x 48 x 75mm, 160g(TYP)(AC) 150g (TYP)(DC)
Storage temp and humidity range -10 to 70ºC not less than 60% RH
Dielectric Strength :AC1500V for 1minute between the power terminals and each
of the input, BCD outputs and the external control (AC power).
DC500V for 1minute between the power terminals and each
of the input, BCD outputs and the external control (DC power).
DC500V for 1minute between the input and each of BCD
outputs and the external control.
AC1500V for 1minute between the casing and each terminal..
Insulation resistance built-in rewriting EEPROM in the case of digital zero

 

Output Modules

 

External Control

Start/Hold :"Hold terminal or COM terminal" short, or hold "ON" with the "0" level
D. ZERO : Shorted between COM terminal and D.ZERO terminal --> ON
Peak.HOLD : Shorted between COM terminal and P. HOLD terminal --> ON
R.RE (relay reset) : Shorted between COM terminal and R.RE terminal --> ON
P.SEL1 to 3 :as below

Attention: "0" level: 0-1.5V apply to COM, "1" level: 3.5-5V apply to COM

 

BCD Output(TTL) (+$70)

Measurement data

 tri-state parallel BCD
Polarity signal 1 level for negative indication
"Over" signal 1 level for overrange indication
Printing command signal Positive pulse output after the completion of measurement
Output Logic Switchable (PC logic not switchable)
Output signal TTL level fan-out = 2, CMOS compatible
(Open Collector) (+$70)
Measurement data Negative logic transistor "ON" when logic is 1
Polarity signal Transistor "ON" for negative indication
"Overrange signal Transistor "ON" for overrange indication
Printing Command Signal Transistor ON after the completion of measurement
Transistor output capacity Applied voltage: 30V max
Current: 10mA max
Saturated output voltage, less than 1.2V at 10mA
Enable Function By connecting the ENABLE terminal to COM terminal or bringing the potential of the ENABLE terminal to”0” level, BCD outputs become High impedance (TTL output) / transistors turn off (Open collector output) * “0” level : 0 to 1.5V with respect to COM terminal


            

 

Reviews

Be the first to submit a review on this product!
Review and Rate this Item

Share







Pin It

Email A Friend

Send your friend a link to this product.