click on thumbnail to zoom
Item #: GHM-RRI
Our Price: $1,275.00
Choose Size  
Mechanical Connection  
Connection Material  
Flow Range  
Seal Material  
Rotor clamp Material  
Analog Output  


  • Uncomplicated measurement of flow rates
  • No magnets; uses inductive sensor
  • Long working life thanks to high quality ceramic axis and special plastic bearing
  • Run-in and run-out sections are not necessary.
  • Modular construction with various connection systems
  • Plug-in and rotatable connections
  • Analog output 4..20 mA or 0..10 V
  • Two programmable switches
  • Graphical LCD display, backlit, can be read in sunlight and in the darkness
  • Selectable units in the display
  • Programmable parameters via rotatable, removable ring (programming protection)
  • Electronics housing with non-scratch, chemically resistant glass
  • Rotatable electronic housing for best reading position
  • Small, compact construction designed for industrial use
  • Simple installation
  • Optionally, non-return valve, filter, constant flow rate device in the connection

The OMNI transducer located on the sensor has a backlit graphics LCD display which is very easy to read, both in the dark and in bright sunlight. The graphics display shows the measured values and parameters in a clearly read format. The measured values are displayed to 4 places along with units of measure, which can be modified by the user. The electronics have an analog output (4..20 mA or 0..10V) and two switching outputs which can be used as limit switches or as two-point controller. The switching outputs are configure as push-pull drivers and can therefore be used both as PNP and NPN outputs. Exceeding limit values is signalled by a red LED which is visible over a long distance, and by a clear text on the display. The stainless steel case has a hardened non-scratch mineral glass pane. The unit is operated by a programming ring fitted with a magnet, so that the housing does not need to be opended to change settings. Operating parameters are adjustd by turning the ring to the right or left. (e.g. switching point, hysteresis...). The ring can also be removed to protect from unintended or unauthorized programming.


Be the first to submit a review on this product!
Review and Rate this Item

Other Items In This Category


Pin It

Email A Friend

Send your friend a link to this product.