Item #: EM 007
Our Price: $1,895.00
Data Logging  
Tip for Plastics  


Measuring Range in Steel 0.0060 - 1.000 inches (0.150 - 25.40 mm)
High Resolution 0.0001"

The TI-007 is a precision ultrasonic wall thickness gauge specifically suited to make extremely precise and high-resolution measurements on thin-walled metal and plastics. It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments. The gauges have a MEASURING RANGE from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in ECHO-TO-ECHO MODE as well as automatically switch to interface echo mode when measuring thicker materials and plastics.


Range in Steel 0.0060-1.0000" (0.15-25.40 mm)
Resolution .0001" (0.001 mm)
Display 4½ - Digit, 0.5" Backlit LCD
Velocity Range 0.0492 to .3937 in/μs. 1250 to 10,000 meters/sec
Transducer Single element with delay tip. 10 to 22 MHz frequency range.
Probe Wearface PEEK (Polyethlethylketone)
Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect LEMO connectors. Optional lengths up to 100 ft. (30 m)
Outputs RS-232, single value when send key is pressed
Temp. Limits Ambient: -20 to 120° F (-30 to 50° C)
Material: 0 to 200° F (-20 to 100° C)
Battery Type Two AA batteries
Battery Life 150 hours
Weight 10 ounces
Size 2.5 x 4.5 x 1.25"
(64 x 114 x 32 mm)
Warranty Gauge: 5 Years
Probes: 90 Days


Be the first to submit a review on this product!
Review and Rate this Item

Other Items In This Category


Pin It

Email A Friend

Send your friend a link to this product.