Item #: EM TTI25
Our Price: $1,550.00
Data Logging  
Quantity:
 

Description 

RANGE 0.025-6.00" (0.60-150.0 mm)

The new TTI-25 Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!
The TI-25 can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.
The TI-25 probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.

Includes standard probe for all solid metals except ( cast iron )  1/4' diameter, 7.5mz dual element transducer. 0.025 to 6.00 inches

  • Wall thickness on hard materials including corrosion of tank walls, piping and hull plates
  • Inspection of metals including steel, cast iron (malleable, and spheroidal graphite), aluminium, copper, brass, titanium, sheet metal, storage tanks, ships, structures and piping systems.
  • Inspection of non-metals including glass, ceramics and hard plastics (except acrylic resin)
  • Direct readout of thickness inches or mm
  • Built in test plate
  • Calibrate for a wide range of rigid materials
  • Scan mode for surveying large areas
  • Data Logging option
  • Special probes for high temperature
  • Acoustic velocity table for common materials included
Specifications TI25 and TI25DL
Range* 0.025-6.00" (0.60-150.0 mm)
see specs for special probes below
Resolution .001" (0.01 mm) (.0001", 0.001mm for 007 type)
Display 4½ - Digit, 0.5" Backlit LCD
Velocity Range 6,500-33,000 ft./sec (2000-10,000 m/sec.)
Probe 7.5 MHz, 0.25" Diameter (6.35 mm) with rubber molded grip.
Wearface PEEK (Polyethlethylketone)
Cable 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m).
Test Block 0.250" (6.35 mm) steel plate built in to the front of housing.
Temp. Limits Ambient: -20 to 120° F (-30 to 50° C)
Material: --ll0 to 200° F (-20 to 100° C)
Special high temperature probes are optionally available.
Battery Type Two AA batteries
Battery Life 200 hours
Minimum headroom 1.3" ( 33mm)
Minimum Sample diameter 0.5 " (12.7 mm)
Minimum radius Convex - 0.5" (12.7 mm)
Concave - 2.5 " (63.5 mm)
Serial output RS232C (8, N, 1, user set baud rate)
Weight 100 ounces (280 g)
Size 2.5 x4.5 x 1.25"
(64 x 114 x 32 mm)
Accessories Included Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case.
Warranty Gauge: 5 years
Probe: 90 days
Serial output RS232C data logging unit only (TI-25DL)

Reviews

Be the first to submit a review on this product!
Review and Rate this Item

Other Items In This Category

Share







Pin It

Email A Friend

Send your friend a link to this product.